型号:ULXS24/58
配有 SM58 话筒的 ULXS4
ULX 标准无线手持式系统，包括配有SM58话筒的ULX4/58 手持式发射机和 ULXS4
分集接收机
ULXS4 标准无线接收机
舒尔 ULX(r) 标准接收机对于职业音乐人和音频安装人员来说，在性能和价格方面都很超值。多功能 ULXS4 接收机的一系列特性为获得完整清晰的音频信号提供了一种简便的方式，这种方式是独立的且不受约束。
ULXS4 无线分集接收机
带组扫描功能的自动频率选择
超过 1400 个可选频率
5 段发射音频信号强度指示
射频指示灯

ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. Multiple system configurations provide limitless options, each with a choice of legendary Shure microphone transmitters. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

Includes:

SM58 Handheld Mic

ULXS4 Diversity Receiver

Automatic Frequency Selection

Over 1400 selectable frequencies

Predictive Diversity

RF presence LED

5 segment audio meter

3 segment transmitter battery fuel gauge

Multi function LCD

1/2 rack design

Detachable 1/4 wave antennas

Durable plastic chassis

Locking DC connector

XLR and 1/4 in. outputs

Mic/line switchable

About ULX Series
Shure's ULX Series is wireless the way it should be simple, agile, and bulletproof solutions that are affordable for working musicians and professional sound installers. Wireless traffic jamming your transmissions The frequency agile ULX features Automatic Frequency Selection finds open frequencies for you. Whether ULX Standard or Professional Series Systems, the clear channels and strong transmission free you to concentrate on what matters most your sound.
 

Technical Info

Channel Frequencies
Channel J1: 554 to 590 MHz
Channel M1: 662 to 698 MHz

RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used).
Refer to the frequency supplement supplied with the system.

Effective Range: 100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference

Audio Frequency Response: 25 to 15,000 Hz, dB
NOTE: Overall system frequency response depends on the microphone element.
*Output Level: Microphone Level = Line Level 20 dB

Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive volt-age applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1 / 4 -inch output

Transmitter Gain Adjustment Range ULX2: 25 dB

Receiver Audio Output Level (+/-38 kHz deviation, 1 kHz tone):
XLR connector (into 600 ohm load): +3.9 dBV (line), -17dBV mic
in. connector (into 3000 ohm load): -2 dBV

Impedance: ULXS4 (output): 50 ohms at line level; 2000 ohms at mic level

Modulation:
+/-38 kHz deviation compressor-expander system with pre- and de-emphasis

FR Power output: ULX2: 30 mW maximum

Dynamic Range: >100 dB, A-weighted

RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)

Image Rejection: 80 dB typical

Spurious Rejection: 75 dB typical

Ultimate Quieting (reference +/-38 kHz deviation): >105 dB, A-weighted

System Distortion (reference +/-38 kHz deviation, 1 kHz modulation):
0.3% total harmonic distortion, typical

Power Requirements:
ULX2: 9V alkaline battery (Duracell MN1604 recommended); 8.4V Nicad optional
ULXS4: 14-18 VDC (negative ground), 550 mA

Battery Life:
8 to 9 hours (with 9V Duracell MN1604 alkaline battery)

Operating Temperature Range:
-20 to 49 degrees C (-4 to 120 degrees F)
Note: Battery characteristics may limit this range

Overall Dimensions:
ULX2/58, ULX2/BETA 58: 241 mm L x 51 mm Dia. (9.5 x 2 in.)
ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.)

Net Weight:
ULX2/58, ULX2/Beta 58: 295 g (10 oz